Frequent questions FAQS
It can be installed directly on ceramic tiles?
Yes, one of the advantages of Decor Dreams is the adaptation to any surface. Its double fixation system, auto adhesive tile plus additional adhesive Decor Dreams allow the instantaneous fixation to almost all the surface. In case of fixation on ceramic tiles, it is mandatory to clean the tiles to remove any residue of grease or painting. It is mandatory apply the Decor Dreams primer in all the walls. If the ceramic tiles have an unevenness bigger than 1mm may create the inadequate installation and it would be necessary to level the wall. You can use our Decor Dreams adhesive to level the unevenness.
How can I clean it?
The vinyl mineral tiles of Decor Dreams are easily clean. It is recommended the use of neutral soap or soapy solution which does not contains abrasive products such as ammoniac, bleach,…
Can I install it myself or need to be installed by a professional?
The Decor Dreams wall covering are very easy to install, just some basic tools are required. We recommend read the instructions of installation to solve the main doubts or watch the installation video.
Can I change the tile/plank in case of break or imperfection?
Yes, the tiles/planks can be easily changed. The estimated time of changing is about 10 minutes.
To change the tile, break with a cut the central part of the tile and detach to the edges with a sharp spatula. It is normal that the adhesive and the EVA foam stays stuck in the wall if the tile has not been installed properly. This can be removed scraping with the sharp spatula.
Have the tiles sound and thermic properties?
Absolutely. Once installed you will feel an improvement regarding thermal isolation up to 3-4 degrees. If we compare it with a standard ceramic wall (cold to touch), the Decor Dreams tile offer a warm and cosy touch. Another benefit is the improvement of sound isolation, within 6-8 dB and optimises the acoustic barriers of the wall where is installed.
¿Can be installed in the shower?
Yes, Decor Dreams is 100% water resistant and it is suitable to damp areas as showers.
It is highly recommended that make the installation all sealed in order to avoid any future filtrations behind the back of the wall. We recommend to apply anti-damp transparent silicone around the perimeter of the tiles or planks during the installation process of each one. You can check how to do it in the installation video.
Can I install on plaster, cement, wood or textured walls and gotele?
To install the wall covering Decor Dreams tiles on plaster or textured wall, it is mandatory to follow the next steps:
Before the installation be have to make sure that the walls are free of damp, greases or unevenness that may affect the perfect adherence of the tiles. You also can use our Decor Dreams adhesive to compensate the unevenness.
It is mandatory apply the Decor Dreamd primer in walls with gotele, plaster, cement, woods, laminated, marble, ceramic or any porous material to have the guarantee.
In case of wanting to install this product on big pore gotele, sand down the gotele to leave the pores to a regular level not higher than 2 mm.
Is it fire resistant?
The mineral wall panels by Decor Dreams have a fire behaviour classification of CS2 d0. This result certifies that in case of fire, the tiles will have the behaviour inside the current regulation. The tiles are flame-retardant, they not spray toxic smoke nor the expansion of the fire and they do not produce detachments of the material. It may be affected by the fire, getting darker or create bubbles in the visible part, deforming the aesthetic base.
The product have the test and classification CS2d0 that allows us to be installed in domestic and commercial places such as restaurants, hotels, shops or industries.
For installing the vinyl wall tiles DecorDreams on plaster or coated wall is necessary to follow the advises:
For installing the vinyl wall tiles DecorDreams on plaster or coated wall is necessary to follow the advises:
- Before installing we have to be sure that the walls are free of damp, greases or recesses which can affect the perfect adherence of the tiles.
- If the tiles have differences in height greater than 2 mm per linear meter, it would be necessary to level the wall. You can also use our DecorDreams adhesive to compensate for such unevenness.
- It is mandatory apply the PRIMER DecorDreams on the walls when it is installed on coated, plaster, cement, wood or laminated or any porous surface in order for the guarantee to apply.
- If you want to install it on coated with high porous, sand the drops of the coated to get a regular level on the wall no superior to 2 mm.